Special Tools

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.

DT-45053 Universal Clamp Press

Equivalent regional tools: Special Tools

Courtesy of GENERAL MOTORS COMPANY

Input Shaft Support Bolt (1) - Remove and DISCARD [12x]
Install DT-45053 Universal Clamp Press (2) to the Stator Shaft Support (3).
Using a paint pen, mark the Automatic Transmission Case Cover and Transmission Case for orientation during installation.
Automatic Transmission Case Cover (3) - Remove