Conditions for Setting the DTC
WARNING: This page is about a different variant/trim than selected.
P2C05, P2C07, P2C08, P2C09, P2C0B, P2C0D, P2C0F, P2C10, P2C12, P2C14, P2C15, P2C16, P2C18, P2C19, P30B0, P30B2, P30B3
- Exhaust Camshaft Profile Actuator Position Sensor or Intake Camshaft Profile Actuator Position Sensor = Not within a calibrated range
- Control module detects 4 faults out of 5 samples.
P2C06, P2C0A, P2C0E, P2C13, P2C17, P30B1
- Exhaust Camshaft Profile Actuator Position Sensor or Intake Camshaft Profile Actuator Position Sensor = Position changed & Component not commanded
- Control module detects 4 faults out of 5 samples.