Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
P2C05, P2C07, P2C08, P2C09, P2C0B, P2C0D, P2C0F, P2C10, P2C12, P2C14, P2C15, P2C16, P2C18, P2C19, P30B0, P30B2, P30B3
- M129 Intake Camshaft Profile Actuator or M130 Exhaust Camshaft Profile Actuator = Commanded On
- Engine = Running
- Ignition Voltage = Greater than 11 V
P2C06, P2C0A, P2C0E, P2C13, P2C17, P30B1
- DTC P0016, P0017, P0335, P0336, P0340, P0341, P0365, P0366 = Not set
- Engine = Running
- Ignition Voltage = Greater than 11 V
Frequency the DTC runs = Continuously - After the running conditions are met