LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2022 >> Blazer RS, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Mechanical - 2.0L - Repair Instructions) >> Repair Instructions >> Engine Mount Bracket Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. GM5743680Courtesy of GENERAL MOTORS COMPANY

    Engine Mount Bracket (2) - Install

    2. CAUTION:

    Refer to Fastener Caution .

    CAUTION:

    Refer to Torque-to-Yield Fastener Caution .

  2. Engine Mount Bracket Bolt (1) - Install NEW and tighten [4x]
    1. First Pass: 58 N.m (43 lb ft)
    2. Final Pass: 60-75 degrees
  3. GM5207702Courtesy of GENERAL MOTORS COMPANY

    Engine Mount (3) - Install - Engine Mount Replacement 

scientia non olet · About LEMON Manuals