LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2022 >> Blazer RS, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Mechanical - 2.0L - Repair Instructions) >> Repair Instructions >> Engine Block Overhaul >> Engine Block Disassemble Procedure

Engine Block Disassemble Procedure

WARNING: This page is about a different variant/trim than selected.
  1. GM5926602Courtesy of GENERAL MOTORS COMPANY

    Engine Coolant Temperature Sensor (1) - Remove

  2. Starter Locating Pin (2) - Remove [2x]
  3. {without K05} Remove the engine coolant heater hole plug (3).
  4. {with K05} Remove the engine coolant heater (4).
  5. GM5028816Courtesy of GENERAL MOTORS COMPANY

    Engine Block Core Hole Plug (1) - Remove

  6. Guide Pin (2, 3) - Remove [4x]
  7. GM5028818Courtesy of GENERAL MOTORS COMPANY

    Cylinder Head Locating Pin (1) - Remove [2x]

  8. GM5028819Courtesy of GENERAL MOTORS COMPANY

    Piston Oil Nozzle Bolt (2) - Remove [4x]

  9. Piston Oil Nozzle (1) - Remove [4x]
  10. GM5028823Courtesy of GENERAL MOTORS COMPANY

    Oil Flow Check Valve (2) - Remove

  11. Oil Flow Check Valve Seal (1) - Remove and DISCARD
scientia non olet · About LEMON Manuals