Single Use Fasteners and Components
Electronic Brake Control Module Bolt [6x]
Courtesy of GENERAL MOTORS COMPANY
| Callout |
Component Name |
|
Preliminary Procedure
- Radiator Surge Tank Replacement (LGX)
, or Radiator Surge Tank Replacement (LSY)
- Prepare the electronic brake booster control module for removal. Control Module References
- Disconnect the electrical connector after the electronic brake booster control module is prepared for removal.
|
| 1 |
Electronic Brake Control Module Bolt [6x]
NOTE:
Some components not shown for graphic clarity.
Procedure
- Install NEW bolts. Do NOT reuse old bolts.
- Tighten in the sequence shown.
Tighten
- First Pass: 2.5 N.m (22 lb in)
- Final Pass: 3.5 N.m (31 lb in)
|
| 2 |
Electronic Brake Booster Control Module Procedure
- Connect the electrical connector.
- Reprogram the electronic brake booster control module. Control Module References
|