Front Seat Cushion Frame Replacement (Power)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Front Seat Cushion Cover and Pad Replacement
1	Driver or Passenger Seat Back Frame Fastener [4x] NOTE: Refer to the procedure link for torque specification. Remove the seat back frame bolts. If NEW threaded components are being installed, loosen the adhesive using a metal pick or similar tool before proceeding. If threaded components are reused, prepare the threaded components using the following steps: Remove any loose cured adhesive from the external threads of the component using a lint free cloth. Thread the cleaned component into the internal mating threads and remove to loosen trapped cured adhesive. Apply thread locking adhesive to the external threads of the component. Adhesives, Fluids, Lubricants, and Sealers Ensure there are no gaps in the thread locking adhesive once applied to the component. Install the bolts on both sides. Front Seat Back Frame Replacement
2	Front Seat Cushion Frame NOTE: The new cushion frame may not have adjuster stops installed. Transfer the adjuster stops from original frame or install new as needed. The frame may need to be adjusted to access the adjuster stops. Procedure Disconnect the electrical connector. Transfer components as necessary.

Callout

Component Name

Preliminary Procedure
Front Seat Cushion Cover and Pad Replacement

Driver or Passenger Seat Back Frame Fastener [4x]

NOTE:

Refer to the procedure link for torque specification.

Remove the seat back frame bolts.
If NEW threaded components are being installed, loosen the adhesive using a metal pick or similar tool before proceeding. If threaded components are reused, prepare the threaded components using the following steps:
1. Remove any loose cured adhesive from the external threads of the component using a lint free cloth.
2. Thread the cleaned component into the internal mating threads and remove to loosen trapped cured adhesive.
3. Apply thread locking adhesive to the external threads of the component. Adhesives, Fluids, Lubricants, and Sealers
4. Ensure there are no gaps in the thread locking adhesive once applied to the component.
Install the bolts on both sides. Front Seat Back Frame Replacement

Front Seat Cushion Frame

NOTE:

The new cushion frame may not have adjuster stops installed. Transfer the adjuster stops from original frame or install new as needed. The frame may need to be adjusted to access the adjuster stops.

Procedure

Disconnect the electrical connector.
Transfer components as necessary.