Approximate Fluid Capacities
Refrigerant System Capacities
| Application | Specification | |
|---|---|---|
| Metric | English | |
| PAG Oil-Refer to Adhesives, Fluids, Lubricants, and Sealers . | ||
| Compressor Replacement | ||
|
NOTE:
The service compressor is precharged with one of the following specified amounts of PAG oil. Refer to the instruction sheet included with the service compressor.Compressor failure can occur if the oil removed during refrigerant recovery is not replaced. |
40 ml1 | 1.4 oz1 |
| Loss of oil on an Abrupt Refrigerant Loss | 30 ml1 | 1.01 oz1 |
| Condenser Replacement | 30 ml1 | 1.01 oz1 |
| Evaporator Replacement | 30 ml1 | 1.01 oz1 |
| Any Line Set (Hose/Tube or Tube Assembly) Replacement | 15 ml1 | 0.51 oz1 |
| Receiver and Dehydrator Replacement | 5 ml1 | 0.17 oz1 |
|
100 ml | 3.4 oz |
| R-1234yf | ||
|
0.6 kg | 1.32 lb |
| 1 If more than the specified amount of PAG oil was drained from a component, add the amount drained. | ||