Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
P0324, P0326
- Engine = Running - For greater than 2 s
- Engine Coolant Temperature = Greater than -40°C (-40°F)
- Intake Air Temperature = Greater than -40°C (-40°F)
- Engine Speed = Greater than 400 RPM - Cumulative = Greater than 200 engine revolutions
- Mass Air Flow Per Cylinder = 400 to 2000 mg
Frequency the DTC runs = Continuously - After the running conditions are met
P0325
- Engine = Running - For greater than 2 s
- Engine Speed = 400 to 8500 RPM - Greater than 100 engine revolutions
- Mass Air Flow Per Cylinder = 200 to 2000 mg
- Engine Coolant Temperature = Greater than -40°C (-40°F)
- Intake Air Temperature = Greater than -40°C (-40°F)
Frequency the DTC runs = Continuously - After the running conditions are met
P0327, P0328
Engine Speed = Less than 8500 RPM
Frequency the DTC runs = Continuously - After the running conditions are met
P06B6
- Engine = Running - For greater than 2 s
- Engine Speed = 400 to 8500 RPM - Greater than 100 engine revolutions
- Mass Air Flow Per Cylinder = 20 to 2000 mg
Frequency the DTC runs = Continuously - After the running conditions are met