Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
DTC P02EE, P02EF, P02F0, P10A3, P10A4, P10A5, P10A6, P10A7, P10A8, P2B00, P2B01, P2B02, P2B03, P2B08, P2B09, P2B0A
- Injector Control Performance - Voltage Out of Range
- DTCs run continuously when the above conditions are met.
DTC P2B95, P2B96, P30D4
- BARO Sensor - Greater than 70 kPa (10.1 PSI)
- ECT Sensor - 12 to 66°C (10.4 to 151°F)
- Engine Run Time - Less than 20 s
- Engine Speed - 250 to 3000 RPM
- Throttle Position - Less than 100%
DTCs run continuously when the above conditions are met.