Conditions for Setting the DTC
WARNING: This page is about a different variant/trim than selected.
P0201, P0202, P0203
Control circuit = Open - For greater than 1 s
P0261, P0264, P0267
Control circuit - Low = Short to Ground - For greater than 1 s
P0262, P0265, P0268
Control circuit - Low = Short to Voltage - For greater than 1 s
P1248, P1249, P124A
Control Circuit Shorted to Control Circuit - For greater than 1 s
P2147, P2150, P2153
Control circuit - High = Short to Ground - For greater than 1 s
P2148, P2151, P2154
Control circuit - High = Short to Voltage - For greater than 1 s