Conditions for Setting the DTC

WARNING: This page is about a different variant/trim than selected.

P0121

Throttle Position Sensor = Commanded state does not match the actual state - For greater than 1 s

P0122

Throttle Position Sensor = Less than 0.02 V - For greater than 1 s

P0123

Throttle Position Sensor = Greater than 0.24 V - For greater than 1 s

P0222

Throttle Position Sensor 2 = Less than 0.02 V - For greater than 1 s

P0223

Throttle Position Sensor 2 = Greater than 0.24 V - For greater than 1 s

P2135

Throttle Position Sensor & Throttle Position Sensor 2 = Not within 7-10% of each other - For greater than 1 s

U0606, U0607

Throttle Position Sensor = Commanded state does not match the actual state