Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
- DTC P0107, P0108, P0237, P0238, P14B6, P2228, P2229 = Not pending
- DTC P0106, P0107, P0108, P0237, P0238, P14B6, P2227, P2228, P2229, P2230, P2610, U06F, U1346, U2011 = Not set
- BARO = 50 to 115 kPa (7.3 to 16.7 PSI)
- Boost Pressure Sensor = 50 to 115 kPa (7.3 to 16.7 PSI)
- Engine = Not Running
- MAP Sensor = 50 to 115 kPa (7.3 to 16.7 PSI)
- Time between current ignition cycle and the last time the engine was running = Greater than 5 s
Frequency the DTC runs = Continuously - After the running conditions are met