Transmission Control Replacement (With Base)

WARNING: This page is about a different variant/trim than selected.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Front Floor Console Replacement WARNING: After installing the transmission range selector shift cable, pull up and push down on ALL connections to verify that the connections are fully seated and properly engaged. Failure to perform this task can result in the vehicle not being able to shift into PARK causing potential vehicle damage and bodily injury. Automatic Transmission Range Selector Lever Cable @ Automatic Transmission Control - Disconnect Automatic Transmission Range Selector Lever Cable Replacement Disconnect the electrical connector.
1	Transmission Control Bolt [4x] CAUTION: Fastener Caution Tighten 9 N.m (80 lb in)
2	Transmission Control Procedure After installing the range selector lever cable, perform a range selector lever cable adjustment. Range Selector Lever Cable Adjustment

Callout

Component Name

Preliminary Procedures

Front Floor Console Replacement

WARNING:

After installing the transmission range selector shift cable, pull up and push down on ALL connections to verify that the connections are fully seated and properly engaged. Failure to perform this task can result in the vehicle not being able to shift into PARK causing potential vehicle damage and bodily injury.

Automatic Transmission Range Selector Lever Cable @ Automatic Transmission Control - Disconnect Automatic Transmission Range Selector Lever Cable Replacement
Disconnect the electrical connector.

Transmission Control Bolt [4x]

CAUTION:

Fastener Caution

Tighten
9 N.m (80 lb in)

Transmission Control
Procedure
After installing the range selector lever cable, perform a range selector lever cable adjustment. Range Selector Lever Cable Adjustment