LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2021 >> Trailblazer RS, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Automatic Transmission - VT40 (MRG) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Manual Shift Shaft Seal Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. GM5226754Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    When installing the seal, ensure the seal lip is firmly seated against the case bore surface. Do not allow the seal lip to be crushed, or a leak may result.

    Install a NEW manual shift shaft seal (1) using DT-51672  Manual Shaft Seal Installer (2).

  2. Install the manual shift detent lever shaft assembly. Manual Shift Detent Lever Shaft Replacement 
scientia non olet · About LEMON Manuals