Automatic Transmission Input Speed Sensor Replacement
WARNING: This page is about a different variant/trim than selected.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Control Valve Body Replacement |
|
| 1 | Automatic Transmission Input Speed Sensor Bolt
CAUTION:
This vehicle is equipped with torque-to-yield or single use fasteners. Install a NEW torque-to-yield or single use fastener when installing this component. Failure to replace the torque-to-yield or single use fastener could cause damage to the vehicle or component.
CAUTION:
NOTE:
Install a NEW bolt. Do NOT reuse the old bolt. Tighten
Special Tools DT-48285 Torque Socket Equivalent regional tools: Special Tools |
| 2 | Automatic Transmission Input Speed Sensor Procedure Perform the transmission adaptive pressure reset. Transmission Adaptive Pressure Reset |