Installation Procedure
WARNING: This page is about a different variant/trim than selected.
Fuel Feed Pipe-Underbody (1) @ Vehicle - Install
- Fuel Feed Pipe-Underbody (1) @ Retainer (2) - Install [5x]
Fuel Feed Pipe-Underbody (1) @ Fuel Feed Pipe-Fuel Tank (2) - Connect - Plastic Collar Quick Connect Fitting Service
Fuel Feed Pipe-Underbody (1) @ Retainer (2) - Install
- Install the left front tire and wheel assembly. Tire and Wheel Removal and Installation
- Lower the vehicle.
Fuel Feed Pipe-Underbody (1) @ Retainer (2) - Install [3x]
Fuel Feed Front Pipe Shield (1) - Install
Fuel Feed Pipe-Underbody (1) @ Retainer (2) - Install
Fuel Feed Pipe-Underbody (1) @ Retainer (3) - Install
- Fuel Feed Pipe-Underbody (1) @ Fuel Feed Front Pipe (2) - Connect - Metal Collar Quick Connect Fitting Service
Brake Pipe Fitting (1) @ Brake Pressure Modulator Valve - Install and tighten [4x] 18 N.m (13 lb ft)
Electrical Connector (1) @ Electronic Brake Control Module (2) - Connect
- Battery Tray - Install - Battery Tray Replacement