Reverse Clutch Release
WARNING: This page is about a different variant/trim than selected.
Manual Valve
The manual valve is moved to the Neutral position and blocks drive\reverse regulator (19) fluid feed pressure from entering the reverse (22) fluid circuit. The reverse (22) fluid circuit is opened to an exhaust at the manual valve.
Reverse Clutch
Reverse (22) fluid exhausts from the reverse clutch thru orifice #44 to the #4 ball check valve allowing the reverse clutch to release.
#4 Ball Check Valve
Exhausting reverse (22) fluid seats the #4 ball check valve and is forced to pass through orifice #43. Reverse (22) fluid then flows to the manual valve where it exhausts.