Control Valve Solenoid Body Cleaning and Inspection
WARNING: This page is about a different variant/trim than selected.
| Callout | Component Name |
|---|---|
|
WARNING:
Valve Springs can be tightly compressed. Use care when removing retainers and plugs. Personal injury could result.
CAUTION:
After cleaning the transmission components, allow to air dry. Do not use cloth or paper towels in order to dry any transmission components. Lint from the towels can cause component failure.
CAUTION:
Preliminary ProceduresClean and inspect all valve components and the valve body. The control valve body assembly is only replaceable as an assembly.Do not reuse cleaning solvents. Previously used solvents may deposit sediment which may damage the component. |
|
| 1 | Control Valve Solenoid Retainer [6x] |
| 2 | Shift Solenoid Valve [3x] |
| 3 | Shift Solenoid Valve [2x] |
| 4 | Shift Solenoid Valve |