Control Valve Body Disassemble

WARNING: This page is about a different variant/trim than selected.

Fig 1: Exploded View Of Control Valve Body Spacer Plate Components

Courtesy of GENERAL MOTORS COMPANY

Control Valve Body Spacer Plate Disassemble

Callout	Component Name
1	Control Valve Body Spacer Plate Retainer [2x]
2	Control Valve Body Spacer Plate NOTE: Inspect the spacer plate bolt pass through holes for damage or brinelling. Replace as necessary.
3	Control Valve Body Locating Pin [2x]
4	Variable Feed Solenoid Clutch Accumulator Piston [3x]
5	Variable Feed Solenoid Clutch Accumulator Piston Spring [3x]
6	Variable Feed Solenoid Clutch Accumulator Piston [3x]
7	Variable Feed Solenoid Clutch Accumulator Piston Spring [3x]

Fig 2: Exploded View Of Control Valve Channel Plate Components

Courtesy of GENERAL MOTORS COMPANY

Control Valve Channel Plate Disassemble

Callout	Component Name
1	Valve Body Bolt [4x] M5 x 30
2	Control Valve Channel Plate
3	Control Valve Body Spacer Plate NOTE: Inspect the spacer plate bolt pass through holes for damage or brinelling. Replace as necessary.
4	Control Valve Body Ball Check Valve [2x]
5	Control Valve Body Ball Check Valve
6	Control Valve Body Locating Pin [2x]