Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
- DTC P0847, P0848, P27EB, P27ED, P27EE, P27EF, P27F1, P27F2 = Not set
- Q77F Transmission Control Solenoid Valve 6 = Enabled
- Accelerator Pedal Position = 0%
- Autostart/Autostop = Inactive
- Engine Speed = Greater than a predefined threshold
- Primary Pulley Speed = Greater than 159 RPM
- Transmission Fluid Temperature = Warmer than 20°C (68°F)
- Transmission Range = Drive
- Vehicle Speed = 0 km/h (0 MPH)
Frequency the DTC runs = Continuously - After the running conditions are met