Conditions for Running the DTC

• DTC P2727, P2729, P2730, U0100 = Not set
• DTCs related to the following system/component = Not Set
  • B14A Transmission Output Shaft Speed Sensor
  • B14C Transmission Input Shaft Speed Sensor
  • B26 Crankshaft Position Sensor
• Accelerator Pedal Position = 8 to 100%
• Battery Voltage = Greater than 9 V
• Engine Speed = Greater than 349 RPM
• Engine Torque = Greater than a predefined threshold
• Ignition = On
• Ignition Voltage = Greater than 9 V
• Transmission Fluid Temperature = -7 to 130°C (20 to 266°F)
• {P2724} Vehicle Speed = 5 to 60 km/h (3 to 37 MPH)

Frequency the DTC runs = Continuously - After the running conditions are met