Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
P0815, P0816
- DTC P0826, P1761, P1824, P182A, P182B, P182C, P182D, P182E, P182F, P1838, P1839, P1840, P1841, P18B5, P18B6, P18B7, P18B8, P18B9, P18BA, P18BB, P18BC, P18BD, P18BE, P18BF, P18C0, P18C1, P18C2, P18C3, P1915 = Not set
- Battery Voltage = Greater than 9 V
- Ignition = On
- Ignition Voltage = Greater than 9 V
- S3 Transmission Shift Lever = Steady State - For greater than 1 s
- Transmission Range = Forward Gear
Frequency the DTC runs = Continuously - After the running conditions are met
P0826
- DTC P1761 = Not set
- Battery Voltage = Greater than 9 V
- Ignition = On
- Ignition Voltage = Greater than 9 V
Frequency the DTC runs = Continuously - After the running conditions are met - For greater than 5 s