Water Pump Assemble

WARNING: This page is about a different variant/trim than selected.

Courtesy of GENERAL MOTORS COMPANY

Engine Oil Cooler Gasket (1, 4) - Install NEW [2x]
Engine Oil Cooler (2) - Install

CAUTION:

Engine Oil Cooler Bolt (3) - Install and tighten [4x] 9.5 N.m (84 lb in)
Courtesy of GENERAL MOTORS COMPANY

Engine Coolant Thermostat Gasket (2) - Install NEW
Engine Coolant Thermostat (1) - Install
Engine Coolant Thermostat Housing Bolt (3) - Install and tighten [3x] 8.5 N.m (75 lb in)
Courtesy of GENERAL MOTORS COMPANY

Water Pump Gasket (3) - Install NEW
Water Pump (2) - Install
Water Pump Bolt (1, 4) - Install and tighten [5x] 7.5 N.m (66 lb in)
Courtesy of GENERAL MOTORS COMPANY

Water Pump Pulley (1) - Install
Water Pump Pulley Bolt (2) - Install and tighten [3x] 15 N.m (11 lb ft)