Turbocharger Oil Feed Pipe Installation

WARNING: This page is about a different variant/trim than selected.

Courtesy of GENERAL MOTORS COMPANY

Turbocharger Oil Feed Pipe Seal Ring (3) - Install NEW

NOTE:

In case of a Turbocharger Replacement, use a NEW Turbocharger Oil Feed Pipe.

Turbocharger Oil Feed Pipe Seal Ring (3) - Lubricate Adhesives, Fluids, Lubricants, and Sealers
Turbocharger Oil Feed Pipe (1) - Install

CAUTION:

Fastener Caution

Turbocharger Oil Feed Pipe Bolt (2) - Install and tighten 8.5 N.m (75 lb in)