Turbocharger Coolant Feed Pipe Installation

WARNING: This page is about a different variant/trim than selected.

Courtesy of GENERAL MOTORS COMPANY

Turbocharger Coolant Feed Pipe Seal (2) - Install NEW
Turbocharger Coolant Feed Pipe Seal (2) - Lubricate Adhesives, Fluids, Lubricants, and Sealers
Turbocharger Coolant Feed Hose Clamp (1) - Release - Hose Clamp Replacement Guidelines - Spring Type
Turbocharger Coolant Feed Pipe (3) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Fastener Caution

Turbocharger Coolant Feed Pipe Bolt (1) - Install and tighten 15 N.m (11 lb ft)