Positive Crankcase Ventilation Vacuum Hose Removal
WARNING: This page is about a different variant/trim than selected.
- NOTE:
DO NOT remove the positive crankcase ventilation vacuum hose unless replacement of the hose is necessary.
- The positive crankcase ventilation vacuum hose clamps are tamper-proof connections.
- The turbocharger must be removed in order to install the positive crankcase ventilation vacuum hose at the turbocharger.
- The camshaft cover, turbocharger, and vacuum hose can be removed together as an assembly and set aside so long as the tamper-proof connection remains intact.
- The camshaft cover or turbocharger can be removed and set aside so long as the vacuum hose connection remains intact and undamaged.
Positive Crankcase Ventilation Vacuum Hose Clamp (1) - Remove and DISCARD [2x] - Use a suitable tool to cut each hose clamp.
- Positive Crankcase Ventilation Vacuum Hose (2) - Remove and DISCARD