Lower Crankcase Extension Removal

WARNING: This page is about a different variant/trim than selected.

Courtesy of GENERAL MOTORS COMPANY

Upper Oil Pan Bolt (1) - Remove [15x]
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Begin to pry at the location (3) first.

Loosen the lower crankcase extension from the engine block. Pry at the locations (1 - 4) that are shown in the graphic.
Courtesy of GENERAL MOTORS COMPANY

Lower Crankcase Extension (2) - Remove
Oil Pan High Pressure Port Seal (1) - Remove and DISCARD [2x]