Intake Manifold Disassemble
WARNING: This page is about a different variant/trim than selected.
Manifold Absolute Pressure Sensor Bolt (1) - Remove
- Intake Air Pressure and Temperature Sensor (2) - Remove
- Seal (3) @ Intake Air Pressure and Temperature Sensor - Remove and DISCARD
Throttle Body Bolt (1) - Remove [3x]
- Throttle Body Adapter (2) - Remove
- Throttle Body Seal (3) - Remove and DISCARD
- Throttle Body (4) - Remove
- Throttle Body Seal (3) - Remove and DISCARD