Engine Support Fixture

WARNING: This page is about a different variant/trim than selected.

Fig 1: Identifying Engine Support Fixture Components

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Front Compartment Side Sight Shield Replacement Evaporative Emission Canister Purge Tube Replacement Engine Mount Brace Replacement (LH) , or Engine Mount Brace Replacement (Rear) Special Tools EN-36857 Engine Lift Bracket EN-51007-1 Main Support Beam EN-51007-3 Radiator Support Beam EN-51007-4 Clamp EN-51007-5 Support Leg, Front EN-51007-6 Hook EN-51007-10 Support Leg, Side EN-52059 Support Fixture Adapter Bolt Equivalent regional tools: Special Tools .
1	EN-36857 Engine Lift Bracket Procedure NOTE: The engine support fixture and lift brackets can be repositioned to either lift bracket to lift in desired lift points. If engine lift brackets are not present, install EN-36857 engine lift brackets as needed.
2	EN-52059 Support Fixture Adapter Bolt
3	EN-51007-10 Support Leg, Side
4	EN-51007-4 Clamp
5	EN-51007-1 Main Support Beam
6	EN-51007-3 Radiator Support Beam
7	EN-51007-5 Support Leg, Front
8	EN-51007-6 Hook