Cylinder Head Removal
WARNING: This page is about a different variant/trim than selected.
 Courtesy of GENERAL MOTORS COMPANY
|
NOTE:
Bolt (1) is longer than the other bolts shown.
Cylinder Head Bolt (1, 2, 3) - Remove [6x]
-
Courtesy of GENERAL MOTORS COMPANY
Loosen the cylinder head bolts (3) in sequence as shown in steps of 1/2 turn
- Cylinder Head Bolt (1) - Remove and DISCARD [8x]
 Courtesy of GENERAL MOTORS COMPANY
|
Cylinder Head (1) - Remove
- Cylinder Head Gasket (2) - Remove and DISCARD