Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Hood Primary Latch Release Cable Handle (1) @ Instrument Panel Knee Bolster - Install
Courtesy of GENERAL MOTORS COMPANY

Attach the mechanic wire to the new hood primary latch release cable (2) and guide the cable in.
Install the hood primary latch release cable handle grommet (1) from the dash panel.
Courtesy of GENERAL MOTORS COMPANY

Hood Primary Latch Release Cable Handle (1) @ Hood Primary and Secondary Latch (2) - Connect
Courtesy of GENERAL MOTORS COMPANY

Hood Primary Latch Release Cable Handle (1) @ Hood Primary Latch Release Cable Clip (2) - Install
Courtesy of GENERAL MOTORS COMPANY

Hood Primary and Secondary Latch (2) - Install
Hood Primary and Secondary Latch Bolt (1) - Install - Hood Primary and Secondary Latch Replacement
Courtesy of GENERAL MOTORS COMPANY

Air Inlet Grille Panel (2) - Install - Air Inlet Grille Panel Replacement
Courtesy of GENERAL MOTORS COMPANY

Front Compartment Side Sight Shield (2) - Install - Front Compartment Side Sight Shield Replacement
Courtesy of GENERAL MOTORS COMPANY

Intake Air Duct (2) - Install - Intake Air Duct Replacement