Front Wheel Opening Molding Replacement

GM5319525

Courtesy of GENERAL MOTORS COMPANY

Callout

Component Name

Preliminary Procedure
Front Wheelhouse Liner Replacement

1

Front Wheel Opening Molding Clip [21x]
Procedure
Replace the front wheel opening molding clips as necessary.

2

Front Wheel Opening Molding

Procedure

Apply two layers of masking tape around the top edge of the service part to prevent paint damage.
Working from the inside fender flange area, disengage the retainers from the front fender and front bumper fascia.
Remove any remaining adhesive residue with a 50/50 mixture by volume of isopropyl alcohol and clean drinkable water. Wipe the surface dry with a clean lint-free towel.