Body Side Upper Front Applique Replacement

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Body Side Upper Front Applique Bolt [3x] CAUTION: Fastener Caution Tighten 2.5 N.m (22 lb in)
2	Body Side Upper Front Applique Retainer [6x] Procedure Replace body side upper front applique retainers as necessary.
3	Body Side Upper Front Applique Procedure Apply two layers of masking tape around the top edge of the service part to prevent paint damage. Use a suitable flat-bladed plastic trim tool to release the body side upper front applique retainers. Remove any remaining adhesive residue with a 50/50 mixture by volume of isopropyl alcohol and clean drinkable water. Wipe the surface dry with a clean lint-free towel.

Callout

Component Name

Body Side Upper Front Applique Bolt [3x]

CAUTION:

Tighten
2.5 N.m (22 lb in)

Body Side Upper Front Applique Retainer [6x]
Procedure
Replace body side upper front applique retainers as necessary.

Body Side Upper Front Applique

Procedure

Apply two layers of masking tape around the top edge of the service part to prevent paint damage.
Use a suitable flat-bladed plastic trim tool to release the body side upper front applique retainers.
Remove any remaining adhesive residue with a 50/50 mixture by volume of isopropyl alcohol and clean drinkable water. Wipe the surface dry with a clean lint-free towel.