Removal Procedure
Unclip the instrument panel steering column upper trim cover (1), using a flat bladed plastic trim tool in order to lift the catch (arrow).
- Rotate the steering wheel 180 degrees, to repeat the procedure on the other side.
Instrument Panel Knee Bolster (1) - Remove - Instrument Panel Knee Bolster Replacement
Instrument Panel Switch Trim Plate (2) - Remove - Instrument Panel Switch Trim Plate Replacement
Instrument Panel Lower Center Trim Plate Applique (1) - Remove - Instrument Panel Lower Center Trim Plate Applique Replacement
Unclip the instrument panel steering column upper trim cover (1) in the direction of the arrows, using a flat bladed plastic trim tool.
Instrument Panel Steering Column Upper Trim Cover Bolt (1) - Remove [2x]
Remove the instrument panel steering column upper trim cover (1) from the vehicle using a flat bladed plastic trim tool.
Remove the instrument panel cluster applique (2) from the instrument panel steering column upper trim cover (1) using a flat bladed plastic trim tool.