LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2021 >> Tahoe Z71 >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Liftgate Weatherstrip Replacement >> Installation Procedure

Installation Procedure

  1. Clean the area where the liftgate weatherstrip (1) will be mounted. Use a suitable solvent with a mixture of 50 percent isopropyl alcohol and 50 percent water by volume, or high-flash naphtha.
    GM5582514Courtesy of GENERAL MOTORS COMPANY
  2. Position the liftgate weatherstrip (1) working downward along the edge, install the liftgate weatherstrip on the liftgate opening flange.
  3. Ensure that the liftgate weatherstrip (1) is seated on the entire liftgate opening flange.
scientia non olet · About LEMON Manuals