LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2021 >> Tahoe Z71 >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Liftgate Strut Replacement >> Installation Procedure

Installation Procedure

  1. Liftgate Strut (2) - Install
    GM5581736Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Ensure the clip is fully seated when the rod is reinstalled. If the clip cannot be fully seated, a new rod should be installed.

  2. Install the strut to the liftgate ball stud first and then install to the body bracket ball stud.
  3. Ensure the clip is fully seated when the rod is reinstalled. If the clip cannot be fully seated, a new rod should be installed.
scientia non olet · About LEMON Manuals