Removal Procedure
- Using the appropriate tool, release the integral retainers.
- Hood Front Edge Weatherstrip (1) - Remove
- Using the appropret tool, release the integral retainers.
- Hood Side Weatherstrip (1) - Remove [2x]
- Hood Insulator Retainer (1) - Remove [6x]
- Release the 3 integral tabs at the bottom of the hood insulator.
- Hood Insulator (2) - Remove
- Hood Hinge Nut (1) - Remove [4x]
- With the aid of an assistant, remove the hood (2).
- Transfer components as necessary.