Removal Procedure
- Open the liftgate.
- Using the appropriate tool, release the tabs on the back body opening side center gutter (1).NOTE:
Component removed for graphic clarity.
- Release the lower actuator retainer clip using a small flat bladed tool to retract clip slightly while removing strut end from corresponding ball stud.
- Liftgate Power Assist Actuator (1) - Reposition
- Back Body Opening Side Molding Bolt (1) - RemoveNOTE:
Component removed for graphic clarity.
- Release the 4 back body opening side gutter retainers and remove the back body opening side gutter (2).