Instrument Panel Displays And Gauges

• Specifications
  • Fastener Specifications
  • Ambient Air Temperature Sensor Resistance
• Schematic Wiring Diagrams
  • Instrument Cluster Wiring Schematics
    • Power, Ground, Serial Data, and Subsystem References
    • Gauges
    • Indicators
    • Driver Information Center
  • Head-Up Display Wiring Schematics
    • Head-Up Display (UV6)
  • Audible Warnings Wiring Schematics
    • Audible Warnings
• Diagnostic Information and Procedures
  • Displays and Gauges Component Replacement Reference
  • DTC B071F
    • Diagnostic Instructions
    • DTC Descriptor
    • Circuit/System Description
    • Conditions for Running the DTC
    • Conditions for Setting the DTC
    • Actions Taken When the DTC Sets
    • Conditions for Clearing the DTC
    • Reference Information
    • Circuit/System Verification
    • Repair Instructions
  • DTC B110A
    • Diagnostic Instructions
    • DTC Descriptor
    • Diagnostic Fault Information
    • Circuit/System Description
    • Conditions for Running the DTC
    • Conditions for Setting the DTC
    • Action Taken When the DTC Sets
    • Conditions for Clearing the DTC
    • Reference Information
    • Circuit/System Verification
    • Circuit/System Testing
    • Component Testing
    • Repair Instructions
  • DTC B135D
    • Diagnostic Instructions
    • Circuit/System Description
    • Reference Information
    • Circuit/System Verification
    • Circuit/System Testing
    • Repair Instructions
  • DTC B15BD
    • Diagnostic Instructions
    • DTC Descriptor
    • Circuit/System Description
    • Conditions for Running the DTC
    • Conditions for Setting the DTC
    • Action Taken When the DTC Sets
    • Conditions for Clearing the DTC
    • Reference Information
    • Circuit/System Testing
    • Repair Instructions
  • DTC B196A
    • Diagnostic Instructions
    • DTC Descriptor
    • Circuit/System Description
    • Conditions for Running the DTC
    • Conditions for Setting the DTC
    • Actions Taken When the DTC Sets
    • Conditions for Clearing the DTC
    • Reference Information
    • Circuit/System Verification
    • Repair Instructions
  • DTC B19B0
    • Diagnostic Instructions
    • DTC Descriptor
    • Circuit/System Description
    • Conditions for Running the DTC
    • Conditions for Setting the DTC
    • Actions Taken When the DTC Sets
    • Conditions for Clearing the DTC
    • Reference Information
    • Circuit/System Verification
    • Repair Instructions
  • DTC B198D
    • Diagnostic Instructions
    • DTC Descriptor
    • Circuit/System Description
    • Conditions for Running the DTC
    • Conditions for Setting the DTC
    • Actions Taken When the DTC Sets
    • Conditions for Clearing the DTC
    • Reference Information
    • Circuit/System Verification
    • Repair Instructions
  • DTC B1A50
    • Diagnostic Instructions
    • DTC Descriptor
    • Circuit/System Description
    • Conditions for Running the DTC
    • Conditions for Setting the DTC
    • Actions Taken When the DTC Sets
    • Conditions for Clearing the DTC
    • Reference Information
    • Circuit/System Verification
    • Repair Instructions
  • DTC B2B9B
    • Diagnostic Instructions
    • DTC Descriptor
    • Circuit/System Description
    • Conditions for Running the DTC
    • Conditions for Setting the DTC
    • Actions Taken When the DTC Sets
    • Conditions for Clearing the DTC
    • Reference Information
    • Circuit/System Verification
    • Repair Instructions
  • DTC P0071-P0074
    • Diagnostic Instructions
    • DTC Descriptors
    • Diagnostic Fault Information
    • Circuit/System Description
    • Conditions for Running the DTC
    • Conditions for Setting the DTC
    • Action Taken When the DTC Sets
    • Conditions for Clearing the DTC
    • Diagnostic Aids
    • Reference Information
    • Circuit/System Verification
    • Circuit/System Testing
    • Component Testing
    • Repair Instructions
  • DTC P0196-P0199 (L82, L84, L87)
    • Diagnostic Instructions
    • DTC Descriptor
    • Diagnostic Fault Information
    • Circuit/System Description
    • Conditions for Running the DTC
    • Conditions for Setting the DTC
    • Action Taken When the DTC Sets
    • Conditions for Clearing the DTC
    • Reference Information
    • Circuit/System Verification
    • Circuit/System Testing
    • Repair Instructions
  • DTC P0196-P0199 (L3B, Lm2, LV3)
    • Diagnostic Instructions
    • DTC Descriptor
    • Diagnostic Fault Information
    • Circuit/System Description
    • Conditions for Running the DTC
    • Conditions for Setting the DTC
    • Action Taken When the DTC Sets
    • Conditions for Clearing the DTC
    • Reference Information
    • Circuit/System Verification
    • Circuit/System Testing
    • Repair Instructions
  • DTC P01BB-P01BD
    • Diagnostic Instructions
    • DTC Descriptor
    • Diagnostic Fault Information
    • Circuit/System Description
    • Conditions for Running the DTC
    • Conditions for Setting the DTC
    • Action Taken When the DTC Sets
    • Conditions for Clearing the DTC
    • Reference Information
    • Circuit/System Verification
    • Circuit/System Testing
    • Repair Instructions
  • DTC P0461-P0464
    • Diagnostic Instructions
    • DTC Descriptors
    • Diagnostic Fault Information
    • Circuit/System Description
    • Conditions for Running the DTC
    • Conditions for Setting the DTC
    • Action Taken When the DTC Sets
    • Conditions for Clearing the DTC
    • Reference Information
    • Circuit/System Verification
    • Circuit/System Testing
    • Component Testing
    • Repair Instructions
  • DTC P0521, P0522, or P0523 (without LM2)
    • Diagnostic Instructions
    • DTC Descriptor
    • Diagnostic Fault Information
    • Circuit/System Description
    • Conditions for Running the DTC
    • Conditions for Setting the DTC
    • Action Taken When the DTC Sets
    • Conditions for Clearing the DTC
    • Reference Information
    • Circuit/System Verification
    • Circuit/System Testing
    • Repair Instructions
  • DTC P0521, P0522, or P0523 (LM2)
    • Diagnostic Instructions
    • DTC Descriptors
    • Diagnostic Fault Information
    • Circuit/System Description
    • Conditions for Running the DTC
    • Conditions for Setting the DTC
    • Action Taken When the DTC Sets
    • Conditions for Clearing the DTC
    • Diagnostic Aids
    • Reference Information
    • Circuit/System Verification
    • Circuit/System Testing
    • Repair Instructions
  • DTC P1434
    • Diagnostic Instructions
    • DTC Descriptor
    • Circuit/System Description
    • Conditions for Running the DTC
    • Conditions for Setting the DTC
    • Actions Taken When the DTC Sets
    • Conditions for Clearing the DTC
    • Reference Information
    • Circuit/System Verification
    • Repair Instructions
  • DTC P143E
    • Diagnostic Instructions
    • DTC Descriptor
    • Circuit/System Description
    • Conditions for Running the DTC
    • Conditions for Setting the DTC
    • Actions Taken When the DTC Sets
    • Conditions for Clearing the DTC
    • Reference Information
    • Circuit/System Verification
    • Repair Instructions
  • DTC P250A
    • Diagnostic Instructions
    • DTC Descriptor
    • Diagnostic Fault Information
    • Typical Scan Tool Data
    • Circuit/System Description
    • Conditions for Running the DTC
    • Conditions for Setting the DTC
    • Action Taken When the DTC Sets
    • Conditions for Clearing the DTC
    • Reference Information
    • Circuit/System Verification
    • Circuit/System Testing
    • Repair Instructions
  • DTC P2C21
    • Diagnostic Instructions
    • DTC Descriptor
    • Circuit/System Description
    • Conditions for Running the DTC
    • Conditions for Setting the DTC
    • Actions Taken When the DTC Sets
    • Conditions for Clearing the DTC
    • Reference Information
    • Circuit/System Verification
    • Repair Instructions
  • DTC U1973
    • Diagnostic Instructions
    • DTC Descriptor
    • Circuit/System Description
    • Conditions for Running the DTC
    • Conditions for Setting the DTC
    • Actions Taken When the DTC Sets
    • Conditions for Clearing the DTC
    • Reference Information
    • Diagnostic Aids
    • Circuit/System Verification
    • Repair Instructions
  • DTC U197E
    • Diagnostic Instructions
    • DTC Descriptor
    • Circuit/System Description
    • Conditions for Running the DTC
    • Conditions for Setting the DTC
    • Actions Taken When the DTC Sets
    • Conditions for Clearing the DTC
    • Reference Information
    • Diagnostic Aids
    • Circuit/System Verification
    • Repair Instructions
  • DTC U197F
    • Diagnostic Instructions
    • DTC Descriptor
    • Circuit/System Description
    • Conditions for Running the DTC
    • Conditions for Setting the DTC
    • Actions Taken When the DTC Sets
    • Conditions for Clearing the DTC
    • Reference Information
    • Diagnostic Aids
    • Circuit/System Verification
    • Repair Instructions
  • DTC U2A90
    • Diagnostic Instructions
    • DTC Descriptor
    • Circuit/System Description
    • Conditions for Running the DTC
    • Conditions for Setting the DTC
    • Actions Taken When the DTC Sets
    • Conditions for Clearing the DTC
    • Reference Information
    • Diagnostic Aids
    • Circuit/System Verification
    • Repair Instructions
  • DTC U2A91
    • Diagnostic Instructions
    • DTC Descriptor
    • Circuit/System Description
    • Conditions for Running the DTC
    • Conditions for Setting the DTC
    • Actions Taken When the DTC Sets
    • Conditions for Clearing the DTC
    • Reference Information
    • Diagnostic Aids
    • Circuit/System Verification
    • Repair Instructions
  • Symptoms - Displays and Gauges
    • Notes
    • Visual/Physical Inspection
    • Intermittent
    • Symptom List
  • Chime Malfunction
    • Diagnostic Instructions
    • Circuit/System Description
    • Reference Information
    • Circuit/System Verification
    • Repair Instructions
  • Engine Oil Pressure Gauge Inaccurate or Inoperative (without LM2)
    • Diagnostic Instructions
    • DTC Descriptor
    • Diagnostic Fault Information
    • Circuit/System Description
    • Conditions for Running the DTC
    • Conditions for Setting the DTC
    • Action Taken When the DTC Sets
    • Conditions for Clearing the DTC
    • Reference Information
    • Circuit/System Verification
    • Circuit/System Testing
    • Repair Instructions
  • Engine Oil Pressure Gauge Inaccurate or Inoperative (LM2)
    • Diagnostic Instructions
    • DTC Descriptors
    • Diagnostic Fault Information
    • Circuit/System Description
    • Conditions for Running the DTC
    • Conditions for Setting the DTC
    • Action Taken When the DTC Sets
    • Conditions for Clearing the DTC
    • Diagnostic Aids
    • Reference Information
    • Circuit/System Verification
    • Circuit/System Testing
    • Repair Instructions
  • Fuel Gauge Malfunction
    • Diagnostic Instructions
    • DTC Descriptors
    • Diagnostic Fault Information
    • Circuit/System Description
    • Conditions for Running the DTC
    • Conditions for Setting the DTC
    • Action Taken When the DTC Sets
    • Conditions for Clearing the DTC
    • Reference Information
    • Circuit/System Verification
    • Circuit/System Testing
    • Component Testing
    • Repair Instructions
  • Head-Up Display Malfunction
    • Diagnostic Instructions
    • Diagnostic Fault Information
    • Circuit/System Description
    • Reference Information
    • Circuit/System Verification
    • Circuit/System Testing
    • Component Testing
    • Repair Instructions
  • Engine Oil Level Sensor Diagnosis
    • Diagnostic Instructions
    • DTC Descriptor
    • Diagnostic Fault Information
    • Typical Scan Tool Data
    • Circuit/System Description
    • Conditions for Running the DTC
    • Conditions for Setting the DTC
    • Action Taken When the DTC Sets
    • Conditions for Clearing the DTC
    • Reference Information
    • Circuit/System Verification
    • Circuit/System Testing
    • Repair Instructions
  • Outside Air Temperature Display Malfunction
    • Diagnostic Instructions
    • DTC Descriptors
    • Diagnostic Fault Information
    • Circuit/System Description
    • Conditions for Running the DTC
    • Conditions for Setting the DTC
    • Action Taken When the DTC Sets
    • Conditions for Clearing the DTC
    • Diagnostic Aids
    • Reference Information
    • Circuit/System Verification
    • Circuit/System Testing
    • Component Testing
    • Repair Instructions
  • Speedometer and/or Odometer Malfunction
    • Diagnostic Instructions
    • Circuit/System Description
    • Reference Information
    • Circuit/System Verification
    • Circuit/System Testing
    • Repair Instructions
  • Tachometer Inaccurate or Inoperative
    • Diagnostic Instructions
    • Circuit/System Description
    • Reference Information
    • Circuit/System Testing
    • Repair Instructions
• Repair Instructions
  • Ambient Air Temperature Calculation Reset
    • Diagnostic Instructions
    • Description
    • When to Perform the Procedure
    • Conditions for Running the Procedure
    • Reference Information
    • With Scan Tool
    • Repair Instructions
  • Ambient Air Temperature Sensor Replacement
    • Removal Procedure
    • Installation Procedure
  • Head-Up Display Switch Replacement
    • Removal Procedure
    • Installation Procedure
  • Head-Up Display Replacement
    • Removal Procedure
    • Installation Procedure
  • Head-Up Display Bracket Replacement
    • Removal Procedure
    • Installation Procedure
  • Instrument Cluster Replacement
    • Removal Procedure
    • Installation Procedure
• Description and Operation
  • Audible Warnings Description and Operation
    • Notes
    • Audible Warnings or Chimes
    • Additional Warnings
    • Backup Alarm (with 8S3)
  • Head-Up Display Description and Operation
    • Notes
    • Head-Up Display
    • Instrument Cluster
    • Head-Up Display Switch
    • Head-Up Display Operation
  • Indicator/Warning Message Description and Operation
    • Indicator Light On
    • Message Displayed
    • CHANGE TIMING BELT MESSAGE (without LWN/LIH)
    • Change Timing Belt Message (LWN)
    • Change Timing Belt Message (LIH)
    • Brakes Overheated
    • Transmission Shift Lever Position Indicator
  • Instrument Cluster Description and Operation
    • Instrument Panel Cluster Control Module (with RPO UHS)
    • Instrument Panel Cluster Control Module (with RPO UDD)
    • Indicators and Warning Messages
    • Engine Coolant Temperature Gauge
    • Engine Oil Pressure Gauge (if equipped)
    • Fuel Level Gauge
    • Speedometer
    • Odometer
    • Tachometer
    • Compass
    • Outside Air Temperature