Coolant Temperature Sender Or Sensor: Remove & Replace
WARNING: This page is about the Suburban High Country, 3.0L Eng VIN T, 4WD, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 3.0L Eng, Engine Coolant Temperature Sensor,At Engine Block,Both,Front & Rear | Includes: Drain and refill Cooling System. Includes: R&I Fender Liner. | 1.4 | B | |
| 3.0L Eng, Engine Coolant Temperature Sensor,At Engine Block,One,Front or Rear | Includes: Drain and refill Cooling System. Includes: R&I Fender Liner. | 1.3 | 0.8 | B |
| 3.0L Eng, Engine Coolant Temperature Sensor,At Radiator | Includes: Drain and refill Cooling System. | 1.1 | 0.7 | B |
| 3.0L Eng, Engine Coolant Temperature Sensor,At Water Pump Inlet Pipe,w/Air Suspension | Includes: Drain and refill Cooling System. Includes: R&I Fender Liner. | 1.8 | 1.1 | B |
| 3.0L Eng, Engine Coolant Temperature Sensor,At Water Pump Inlet Pipe,w/o Air Suspension | Includes: Drain and refill Cooling System. Includes: R&I Fender Liner. | 1.7 | 1.1 | B |