Circuit/System Verification
- Ignition ON.
- Verify no DTC is set.
- If any DTC is set,
Diagnose any DTCs first. Refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- Go to next step: If no DTCs are set
- If any DTC is set,
- Verify all indicators except the engine malfunction indicator illuminate and turn off as commanded when performing the All Indicators test with the scan tool.
- If any indicators do not illuminate and turn off as commanded
Replace the P16 Instrument Cluster.
- Go to next step: If all indicators respond properly
- If any indicators do not illuminate and turn off as commanded
- Verify all segments illuminate when performing the Driver Information Center Segments test with the scan tool.
- If any segments do not illuminate
Replace the P16 Instrument Cluster.
- Go to next step: If all segments illuminate properly
- If any segments do not illuminate
- All OK.