|
Preliminary Procedures
- Rear Wheelhouse Liner Replacement
- Underbody Rear Air Rear Deflector Replacement (LFV)
, or Underbody Rear Air Deflector Replacement - Left Side (XFE)
, or Underbody Rear Air Deflector Replacement - Right Side (XFE)
|
| 1 |
Rear Bumper Fascia Bolt [2x]
Tighten
2.5 N.m (22 lb in) |
| 2 |
Rear Bumper Fascia Nut [2x]
Tighten
2.5 N.m (22 lb in) |
| 3 |
Rear Bumper Fascia Retainer [2x] |
| 4 |
Rear Bumper Fascia Procedure
- Carefully push a small nylon wedge between the fascia and the rear fascia guide. Insert a small flat-bladed tool into the fascia slot and depress the snaps one at a time and pull on the fascia at the same time to gradually remove the fascia from the rear fascia guide.
- Disconnect all electrical connectors.
- Transfer components as necessary.
|