Circuit/System Testing
- Verify DTC's P0615, P0616 or P0617 are not set
- If the DTC is set
- Go to next step: If the DTC is not set
- Clear the DTC C15C5.
- Test drive the vehicle under the condition for setting the DTC,
- Verify the DTC does not set
- If the DTC resets
Replace the K160 Brake System Control Module.
- Go to next step: If the DTC does not reset
- If the DTC resets
- A fault is not currently present and may be an intermittent condition. Refer to Diagnostic Instructions.