Installation Procedure
Brake Caliper (1) - Install
- CAUTION:
Brake Caliper Guide Pin Bolt (1) - Install and tighten 40 N.m (30 lb ft) [2x]
- NOTE:
Install NEW brake hose fitting gaskets.
Brake Hose Fitting Gasket (1) @ Brake Hose Fitting (2) - Install [2x]
Brake Hose Fitting Bolt (1) - Install and tighten 40 N.m (30 lb ft)
- Install the park brake cable to the brake caliper actuator lever. - Parking Brake Rear Cable Replacement - Left Side , Parking Brake Rear Cable Replacement - Right Side
- Bleed the brake system. Hydraulic Brake System Bleeding (Pressure) , or Hydraulic Brake System Bleeding (Manual)
- Tire and Wheel Removal and Installation - Install