LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2021 >> Malibu LT >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes >> Repair Instructions >> Rear Brake Bleeder Valve Replacement

Rear Brake Bleeder Valve Replacement

GM5125583Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
WARNING:

The battery must be disconnected to prevent the brake master cylinder from pressurizing the hydraulic system during its automated self diagnostic tests that can possibly occur when a door is opened or the key transmitter is activated. Failure to follow this precaution may cause personal injury.

Preliminary Procedures

  1. Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection (Without KL9) , or Battery Negative Cable Disconnection and Connection (With KL9)
  2. Remove the tire and wheel assembly. Tire and Wheel Removal and Installation
1 Rear Brake Bleeder Valve Cap
2 Rear Brake Caliper Bleeder Valve

Procedure

  1. Install the tire and wheel assembly. Tire and Wheel Removal and Installation
  2. Connect the battery negative cable. Battery Negative Cable Disconnection and Connection (Without KL9) , or Battery Negative Cable Disconnection and Connection (With KL9)
  3. Bleed the brake system. Hydraulic Brake System Bleeding (Pressure) , or Hydraulic Brake System Bleeding (Manual)

Tighten 
17 N.m (13 lb ft)