Body Side Rear Window Garnish Molding Replacement

GM4215828

Courtesy of GENERAL MOTORS COMPANY

Callout

Component Name

Preliminary Procedures

Disable the SIR system. SIR Disabling and Enabling
Quarter Window Lower Trim Finish Panel Replacement

1

Body Side Rear Window Garnish Molding

Procedure

Use a flat bladed plastic trim tool.
Pull outward from the top front to release the upper portion of the molding, then move forward and upward to release the tabs which hook into rear window panel trim.
Enable the SIR System. SIR Disabling and Enabling