Fastener Specifications
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Front Seat Back Frame Bolt | 45 N.m (33 lb ft) |
| Driver or Passenger Seat Bolt | 45 N.m (33 lb ft) |
| Driver or Passenger Seat Inner Adjuster Front Finish Cover Fastener | 2.5 N.m (22 lb in) |
| Front Seat Adjuster Handle Fastener | 2.5 N.m (22 lb in) |
| Front Seat Cushion Outer Finish Cover Fastener | 2.5 N.m (22 lb in) |
| Front Seat Vertical Actuator Lever Fastener | 2.5 N.m (22 lb in) |
| Front Seat Vertical Adjuster Bracket Bolt | 42 N.m (31 lb ft) |
| Rear Seat Armrest Fastener | 3 N.m (27 lb in) |
| Rear Seat Back Bolster Fastener | 9 N.m (80 lb in) |
| Rear Seat Back Bolster Nut | 9 N.m (80 lb in) |
| Rear Seat Back Cushion Hinge Fastener | 45 N.m (33 lb ft) |
| Rear Seat Back Latch Fastener | 22 N.m (16 lb ft) |