Front Seat Cushion Outer Finish Cover Replacement (Power)

GM4293376

Courtesy of GENERAL MOTORS COMPANY

Callout

Component Name

1

Front Seat Cushion Outer Finish Cover Fastener [2x]

CAUTION:

Refer to Fastener Caution .

Tighten

2.5 N.m (22 lb in)

2

Front Seat Cushion Outer Finish Cover

NOTE:

If the hooks are not fully disengaged, damage to the cover will occur.
It is necessary to remove both switches before disconnecting the electrical connectors.

Procedure

Disconnect the outer finish cover from the inner finish cover.
Press inward on the outer finish cover just above the switch to disengage the hooks from the retainer and lift upward to remove the outer finish cover.
Transfer components as necessary.