Instrument Panel Trim Plate Replacement

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Instrument Panel Center Bolt Cover Replacement Heater and Air Conditioning User Interface Control Replacement (CJ2) , or Heater and Air Conditioning User Interface Control Replacement (C4P)
1	Instrument Panel Trim Plate Bolt [4x] CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
2	Radio Control Bolt [4x] Tighten 2.5 N.m (22 lb in)
3	Radio Control Procedure Disconnect the electrical connectors. Refer to Control Module References for programming and setup procedures, if required.
4	Instrument Panel Trim Plate Procedure Release the retainers.